All Archives - Search

Category: ALL (150 records) Archive: CLOSED - #928 - OnLine Consignment Auction - New Merchandise - This Auction Started to Close - Monday, November 19, 2018 @ 9:45 AM CST

Item Description Price
928.001Jet Floor Drill Press, 1 Motor HP, Belt Drive Type, 16 – 7/8” Swing, 115 / 230 V, model# 49LX95, single phase, 60 hz, looks to be complete, not sure if any pats are missing (main aisle) 752.00
928.002Ingersoll Rand Piston Air Compressor, electric start, 14.0HP, 30 gal tank, missing gas cap, untested, looks to be complete, not sure if any other parts are missing, may have some scuffs and scratches (main aisle) 1400.00
928.003Southworth Pallet Tilter, 2000 lb load capacity, fork length 40” works, has scuffs and scratches and dents(main rack) 160.00
928.004Dayton Mobile Manual Lift & Push Scissor Lift Table, 990 lb load capacity, model# 2MPP6, platform size 40” x 20”, has some scuffs and scratches (main rack) 189.00
928.005Dayton Hand Pallet Jack, 4400 lbs capacity, has some scuffs and scratches (PR#5) 151.00
928.006Cylinder Hand Truck (Pod B) 17.00
928.007Metaltech Drywall Cart, unassembled, 10” x 36”, looks to be complete, not sure if any parts are missing (Z-R#0) 172.00
928.008Tornado Floor Scrubber, 17”, 1.5HP, works, has a small dent, bottom rubber seal is ripped, may have scuffs and scratches (Pod B) 141.00
928.009American Standard Toilet Bowl, (PR#2) 8.00
928.010Dayton Roof Curb, adjustable width, model# 1VN43, looks to be complete, not sure if any parts are missing (PR#6) 41.00
928.011(2) Aluminum Swing Door, 35” x 82-1/2” has scuffs and scratches (WR# 1) 120.00
928.012Pair of Fork Lift Extension 5” x 8ft, has scuffs and scratches, may be subjected to rust (Pipe Rack) 150.00
928.013(10) 1” Conduit 10ft long, has some scuffs and scratches, one pipe s bent, may be subjected to rust (pipe rack) 60.00
928.014(10) 1” Conduit 10ft long, has some scuffs and scratches, may be subjected to rust (pipe rack) 56.00
928.015(10) 1” Conduit 10ft long, has some scuffs and scratches, may be subjected to rust (pipe rack) 25.00
928.016(10) 1” Conduit 10ft long, has some scuffs and scratches, may be subjected to rust (pipe rack) 25.00
928.017Genie Manual Lift & Push Lift, 400 lb capacity, missing forks, may have scuffs and scratches (Pod B) 268.00
928.018Metal Work Bench Top, 30” x 8ft, may have scuffs and scratches, may be subjected to rust (Z-R#0) 14.00
928.019(2) Fiber Grate, 4ft x 4ft, has grit top, has scuffs and scratches (Z-R#0) 18.00
928.020Aluminum Straight Ramps, 15” x 80”, may have some scuffs and scratches (Pod B) 112.50
928.021Dayton Galvanized Fan Guard unassembled, 40-1/8”h x 40-1/8”w x 27”, model# 1WBU5,looks to be complete, not sure if any parts are missing, may have scuffs and scratches, may be subjected to rust (Z-R#0) 13.00
928.022(4) Louver Panels, 48” x 61”, may have some scuffs and scratches and corners may be dented, may be subjected to rust (Z-R#0 Rack) 35.00
928.023(4) Louver Panels, 48” x 61”, may have some scuffs and scratches, may be subjected to rust (Z-R#0) 55.50
928.024(4) Wire Panels, 47” x 94”, may have some dents, may be subjected to rust (Z-R#0) 20.88
928.025Metal Picnic Table, 30” x 8ft, seats are 6ft long, may be a handicap table, missing cross beams and hardware may have some scuffs and scratches (Z-R#0) 132.00
928.026Jarke Starter Inclined Cantilever Rack, 72” w x 26-1/2” d x 7ft h, arm length 16” , looks to be complete, not sure if any parts are missing, may be subjected to rust (Z-R#0) 196.00
928.027Dayton Low Profile narrow General Purpose Manual Pallet Jack, 4400 lb load capacity, 6”w x 48” , works, has some scuffs and scratches (PR#6) 141.00
928.028Dayton Hand Truck, 400 lb capacity, has some scuffs and scratches (Pod B) 33.00
928.029Little Giant 8ft Fiberglass Step Ladder, 300 lb capacity, may have some scuffs and scratches (Z-Rack) 40.00
928.030Werner Aluminum Extension Plank, 250 lb capacity, 2”h x 14”w, x 10 to 17 ft, has a hole on the side, has scuffs and scratches (Z-Rack) 85.00
928.031(10) Conduit ¾” x 10ft, may have scuffs and scratches (pipe rack) 35.01
928.032Single Folding Gate, 6-1/2ft H, looks to be complete, not sure if any parts are missing (Z-R#0) 14.00
928.033Bluff Aluminum Dock Board, 10,000 lb load capacity, 36” x 54”, has some scuffs and scratches (Z-R#0) 291.00
928.034Fire Recue Tool, 10ft long, may have scuffs and scratches (WR#1) 8.76
928.035Fire Recue Tool, 12ft long, may have scuffs and scratches (WR#1) 9.00
928.036(3) Guard Rails, 42”h x 118”, has some dents and scuffs and scratches (side of Pod 4) 55.00
928.037(2)Husky Up Rights, 36” x 8ft, (4) Cross Beams 10ft, 4044 lb capacity, all may have some scuffs and scratches (Z-R# 0) 99.00
928.038(1) Husky Up Right, 10ft x 36”, (1) Husky Up Right 8ft x 36”, (2) Cross Beams 8ft, 4044 lb capacity,(2) Cross Beams 8ft, 6111lb capacity , all tear drop, all may have scuffs and scratches, may be subjected to rust (Z-R#0) 90.00
928.039(2) Boxes of Donn Suspension System Main Tee, 12ft x 1.64” some ends are dented, may have some scuffs and scratches, may be subjected to rust (Z-R#0) 5.00
928.040Berner Low Profile Air Curtain, 6ft max. door width 8ft. max. mount HT. 54 dBA@ 10 feet, 2870fpm, model# 36WK07, 3 phase, 460V, 50-60 HZ, untested, has some dents and scuffs and scratches (PR#4) 10.00
928.041 Louisville Wood Attic Ladder, 8ft. 9” to 10ft, ceiling height range, 79” swing clearance, 82.0 lb net weight, model# 16V964, looks to be complete, not sure if any parts are missing (PR#4) 26.00
928.042Hallowell Storage Cabinet, 36” x 18” x 78”, has keys, has some scuffs and scratches, may be subjected to rust (Z-R#2) 17.00
928.043Stanley Vidmar, Modular Drawer Cabinet, 10 drawers, 30”w x 27”d x 59”h, model# 12C834, has keys, has some scuffs and scratches (opr-aisle) 691.66
928.044 Campbell Hydrant 68” has some scuffs and scratches (bpr-rack) 18.00
928.045H.K. Porter Bolt Cutter, #5 (Pod B) 18.00
928.046Louisville 8ft Fiberglass Double Sided Step Ladder, 375lb capacity, missing plastic foot, has some scuffs and scratches (Z Rack) 56.00
928.047Louisville 5ft Fiberglass Double Sided Step Ladder, 300 lb capacity, has a crack spot on the edge of one leg, has scuffs and scratches (Z-Rack) 41.00
928.048Werner 8ft Aluminum Double Sided Step Ladder, 300 lb capacity, may have some scuffs and scratches (Z-Rack) 41.00
928.049Werner 10ft Fiberglass Double Sided Step Ladder, 375 lb capacity, has scuffs and scratches (Z-Rack) 71.00
928.050Werner 4ft Fiberglass Platform Step Ladder 375 lb capacity, has scuffs and scratches (Z-Rack) 46.00

Select page to view: p1