Search in: Keywords:
See bottom of page to submit bids
Category: ALL (87 records) #718 – OnLine Consignment Auction – Woodshop Equipment and Tools - Auction Starts Closing
Wednesday, August 21, 2019 at 9:45AM

Item Photo Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
718 01

more
pics

T_718.01.JPGDelta 10” Unisaw saw table, Cat # 36-869, 230 volt, single phase, 3 hp, Biesemeyer T-square saw fence, saw table is 40” wide x 27” deep with 34” extension, like new in working condition (LD)
These items are located at OAS - 810 Magna Dr, Round Lake, IL 60073
Contact OAS (847-546-2095)
Open Monday to Friday - 8:00 am to 4:00 pm For Inspection or Removal
ITEMS MUST BE PICKED UP AT THE OAS FACILITY BY
Friday, August 23rd OTHERWISE $5.00 PER DAY WILL BE ASSESSED

INSPECT ALL ITEMS BEFORE BIDDING - THE ENTIRE RISK AS TO THE QUALITY, AUTHENTICITY & CONDITION RESTS WITH THE BUYER. Some items may not be complete.
Reserve - 10% Buyers Fee – 7% Sales Tax


This item has a reserve.
7 7047 400.00
Reserve not met
410.00
submit bid
718 02

more
pics

T_718.02.JPGDelta 3-speed tilting spindle shaper model 43-450, 220 volt, 1ph, 3hp. Stock feeder model 36-850, Deluxe shaper fence. Table is 28” x 23”. In good working condition.
This item has a reserve.
4 7047 250.00
Reserve not met
260.00
submit bid
718 03

more
pics

T_718.03.JPGAdwood edge banding trimmer, polisher, model # T35 95 179, overall dimensions 3ft x 2ft (GS#1) 2 16288 17.00 19.00
submit bid
718 04

more
pics

T_718.04.JPGWoodtek edge banding system, model # 834-842, date code 12/2013, serial # 13120224, overall dimensions 27” x 27” (GS#1) 2 13838 24.00 26.00
submit bid
718 05

more
pics

T_718.05.JPGGrass mortising tool, serial # B10455, 115volt, 1 hp, tested – will not turn on (GS#1) 6 7122 20.00 22.00
submit bid
718 06

more
pics

T_718.06.JPGHitachi 15” mitersaw, 115volt, in working condition, includes material extensions, stop and clamp (GS#1) 2 16522 12.00 14.00
submit bid
718 07

more
pics

T_718.07.JPGCampbell Hausfeld 4 gallon dual tank air compressor, model # WL501002AJ, 1 hp, wired for 115 volt (GS#1) 1 16522 10.00 12.00
submit bid
718 08

more
pics

T_718.08.JPGDelta Router/Shaper, model # 43-505, single phase, 120 volt, tested in working condition, comes with ½” – ¼” reducer collet (GS#1) 2 15898 30.00 35.00
submit bid
718 09

more
pics

T_718.09.JPGMakita 10” table saw, model #2708, 115 volt, tested in working condition (GS#1) 4 5437 23.50 25.50
submit bid
718 10

more
pics

T_718.10.JPGSE-Cur 8 gallon self closing rinse tank, model # R8, looks new, overall dimensions 27” x 14 ½” 33” tall (east wall) 3 9135 17.00 19.00
submit bid
718 11

more
pics

T_718.11.JPG4 Tier Roll around cart, with customized 1 ½” hole, 44” x 20” x 70” tall to the top 2 15898 17.00 19.00
submit bid
718 12 T_718.12.JPGDewalt wireless 5 3/8” trim saw model DW936, Dewalt wireless ½” drill/driver/hammer saw, (1) batter charger, no batteries, comes with case (GS#1) 3 14269 8.00 9.00
submit bid
718 13

more
pics

T_718.13.JPGMilwaukee heavy duty Router 120 volt, like new (GS#1) 8 8570 36.00 41.00
submit bid
718 14

more
pics

T_718.14.JPGPanther King bench grinder, model # LF-137, ¼ hp, 3450 rpm, single ph, 120 volt, tested – in working condition (GS#1) 4 15898 16.00 18.00
submit bid
718 15 T_718.15.JPGHeavy Duty Copper colored pot and pan hanger, 42” x 18” x 11” high, like new condition, comes with the mounting hooks (GS#1) 2 16522 35.00 40.00
submit bid
718 16

more
pics

T_718.16.JPGMakita cordless driver drill, 6 ½” circular saw, (2) battery chargers and (2) batteries, comes with carrying case, tested in working condition (GS#1) 3 16522 14.50 16.50
submit bid
718 17 T_718.17.JPGPorter Cable orbital sander has a bad cord, tested – in working condition (GS#1) 6 8570 12.00 14.00
submit bid
718 18 T_718.18.JPGDewalt orbital sander, tested – in working condition (GS#1) 3 14269 8.00 9.00
submit bid
718 19 T_718.19.JPGPorter Cable orbital sander, tested – in working condition (GS#1) 4 8570 8.00 9.00
submit bid
718 20 T_718.20.JPGMHT model #750 heat gun, tested – in working condition (GS#1) 2 17297 7.00 8.00
submit bid
718 21 T_718.21.JPGSkil Saw 8 ¼” saw, model 825, comes with 8” metal cutting blade, 8 ¼” blade, tested – in working condition (GS#1) 5 13047 14.00 16.00
submit bid
718 22

more
pics

T_718.22.JPGDavid White ML 200 visible beam laser system with trip pod, tested – in working condition, the tripod does not connect with the transit (GS#1) 1 7818 25.00 30.00
submit bid
718 23

more
pics

T_718.23.JPGJig for a shaper , unknown model or brand (GS#1) 11 8570 22.00 24.00
submit bid
718 24

more
pics

T_718.24.JPGDelta sliding shaper jig (GS#1) 10 8570 20.00 22.00
submit bid
718 25

more
pics

T_718.25.JPGRamsey model D60, has fasteners, drive pins, green shots, power loads and comes with carrying case (GS#1)       5.00
submit bid
718 26

more
pics

T_718.26.JPG(2) Dayton mini air saws, 2-pack of 3” reciprocating saw blades, Sioux air grinder, tested – in working condition (GS#1) 9 16200 18.00 20.00
submit bid
718 27 T_718.27.JPG48” level, (3) Large caulk guns, ½” drill, pair of Husky knee pads (GS#1) 3 7047 7.00 8.00
submit bid
718 28

more
pics

T_718.28.JPGLarge lot of wood and laminate edging, various size rolls and widths, natural birch, white oak, maple, red oak, mahogany, veneer edging, (2) sealing irons, roller, (4) misc cutters (GS#1) 6 7047 18.00 20.00
submit bid
718 29 T_718.29.JPG(7) 24” Bar clamps, (1) 36” bar clamp (GS#1) 5 7122 18.00 20.00
submit bid
718 30 T_718.30.JPG(3)24” x ¾”pipe clamps (GS#1) 5 7047 9.00 10.00
submit bid
718 31 T_718.31.JPG(4) Rockler 24” x ¾” pipe clamps (GS#1) 7 7047 14.00 16.00
submit bid
718 32 T_718.32.JPG(4) Rockler 20” x ¾” pipe clamps (GS#1) 6 17636 10.00 12.00
submit bid
718 33 T_718.33.JPG(7) 18” x 1 3/8” wide bar clamps, rust and has concrete residue on them (GS#1) 1 13047 5.00 6.00
submit bid
718 34 T_718.34.JPG(3) Rockler 54” x ¼” pipe clamps (GS#1) 4 7047 8.00 9.00
submit bid
718 35 T_718.35.JPG(3) Rockler 24” x ¾”pipe clamps (GS#1) 4 7047 8.00 9.00
submit bid
718 36 T_718.36.JPG(2) Jorgenson 5ft x 1 5/8”barclamps (GS#1) 2 13183 6.00 7.00
submit bid
718 37 T_718.37.JPG(2) Bessey 32” bar clamps (GS#1) 8 8570 22.00 24.00
submit bid
718 38 T_718.38.JPG(3) Jorgenson 18” bar clamps, (1) 26” bar clamp (GS#1) 4 13047 9.00 10.00
submit bid
718 39 T_718.39.JPGTru-Grip Back to back bench clamp – 50” grip, 50” bench clamp (GS#1) 1 16200 5.00 6.00
submit bid
718 40 T_718.40.JPG(2) Bessey 25” bar clamps, (1) 12” bar clamp (GS#1) 12 8570 30.00 35.00
submit bid
718 41 T_718.41.JPG(2) Jorgenson 36” x 1 ½” wide bar clamps (GS#1) 3 6757 7.00 8.00
submit bid
718 42 T_718.42.JPG(2) Jorgenson 36” x 1 ½” wide bar clamps (GS#1) 1 6757 5.00 6.00
submit bid
718 43 T_718.43.JPG(2) Jorgenson adjustable wood clamp (GS#1) 1 17297 5.00 6.00
submit bid
718 44 T_718.44.JPG(2) Woodcraft adjustable wood clamps (GS#1) 3 17297 9.00 10.00
submit bid
718 45 T_718.45.JPGProfessional wood worker misc ¼” router bits, approximately 67 bits (GS#1) 12 17450 22.00 24.00
submit bid
718 46 T_718.46.JPG(25) Misc router bits ¼” shaft (GS#1) 16 8570 36.00 41.00
submit bid
718 47 T_718.47.JPG(24) Misc ¼” – ½” Router bits (GS#1) 4 7047 8.00 9.00
submit bid
718 48 T_718.48.JPG(12) ½” Router bits (GS#1) 6 7047 10.00 12.00
submit bid
718 49 T_718.49.JPG(3)Sets of various size shaper blades (GS#1) 1 7047 5.00 6.00
submit bid
718 50 T_718.50.JPG(3) Warrior ¼ and 7/8” radius Router bits, new (GS#1) 9 8570 17.00 19.00
submit bid

Bidder number Password - Increments

Select page to view: p1