Details

Obenauf Auction Service, Inc.
#718 – OnLine Consignment Auction – Woodshop Equipment and Tools - Auction Starts Closing
Wednesday, August 21, 2019 at 9:45AM

Item Description
718.01.Delta 10” Unisaw saw table, Cat # 36-869, 230 volt, single phase, 3 hp, Biesemeyer T-square saw fence, saw table is 40” wide x 27” deep with 34” extension, like new in working condition (LD)
These items are located at OAS - 810 Magna Dr, Round Lake, IL 60073
Contact OAS (847-546-2095)
Open Monday to Friday - 8:00 am to 4:00 pm For Inspection or Removal
ITEMS MUST BE PICKED UP AT THE OAS FACILITY BY
Friday, August 23rd OTHERWISE $5.00 PER DAY WILL BE ASSESSED

INSPECT ALL ITEMS BEFORE BIDDING - THE ENTIRE RISK AS TO THE QUALITY, AUTHENTICITY & CONDITION RESTS WITH THE BUYER. Some items may not be complete.
Reserve - 10% Buyers Fee – 7% Sales Tax

718.02.Delta 3-speed tilting spindle shaper model 43-450, 220 volt, 1ph, 3hp. Stock feeder model 36-850, Deluxe shaper fence. Table is 28” x 23”. In good working condition.
718.03.Adwood edge banding trimmer, polisher, model # T35 95 179, overall dimensions 3ft x 2ft (GS#1)
718.04.Woodtek edge banding system, model # 834-842, date code 12/2013, serial # 13120224, overall dimensions 27” x 27” (GS#1)
718.05.Grass mortising tool, serial # B10455, 115volt, 1 hp, tested – will not turn on (GS#1)
718.06.Hitachi 15” mitersaw, 115volt, in working condition, includes material extensions, stop and clamp (GS#1)
718.07.Campbell Hausfeld 4 gallon dual tank air compressor, model # WL501002AJ, 1 hp, wired for 115 volt (GS#1)
718.08.Delta Router/Shaper, model # 43-505, single phase, 120 volt, tested in working condition, comes with ½” – ¼” reducer collet (GS#1)
718.09.Makita 10” table saw, model #2708, 115 volt, tested in working condition (GS#1)
718.10.SE-Cur 8 gallon self closing rinse tank, model # R8, looks new, overall dimensions 27” x 14 ½” 33” tall (east wall)
718.11.4 Tier Roll around cart, with customized 1 ½” hole, 44” x 20” x 70” tall to the top
718.12.Dewalt wireless 5 3/8” trim saw model DW936, Dewalt wireless ½” drill/driver/hammer saw, (1) batter charger, no batteries, comes with case (GS#1)
718.13.Milwaukee heavy duty Router 120 volt, like new (GS#1)
718.14.Panther King bench grinder, model # LF-137, ¼ hp, 3450 rpm, single ph, 120 volt, tested – in working condition (GS#1)
718.15.Heavy Duty Copper colored pot and pan hanger, 42” x 18” x 11” high, like new condition, comes with the mounting hooks (GS#1)
718.16.Makita cordless driver drill, 6 ½” circular saw, (2) battery chargers and (2) batteries, comes with carrying case, tested in working condition (GS#1)
718.17.Porter Cable orbital sander has a bad cord, tested – in working condition (GS#1)
718.18.Dewalt orbital sander, tested – in working condition (GS#1)
718.19.Porter Cable orbital sander, tested – in working condition (GS#1)
718.20.MHT model #750 heat gun, tested – in working condition (GS#1)
718.21.Skil Saw 8 ¼” saw, model 825, comes with 8” metal cutting blade, 8 ¼” blade, tested – in working condition (GS#1)
718.22.David White ML 200 visible beam laser system with trip pod, tested – in working condition, the tripod does not connect with the transit (GS#1)
718.23.Jig for a shaper , unknown model or brand (GS#1)
718.24.Delta sliding shaper jig (GS#1)
718.25.Ramsey model D60, has fasteners, drive pins, green shots, power loads and comes with carrying case (GS#1)
718.26.(2) Dayton mini air saws, 2-pack of 3” reciprocating saw blades, Sioux air grinder, tested – in working condition (GS#1)
718.27.48” level, (3) Large caulk guns, ½” drill, pair of Husky knee pads (GS#1)
718.28.Large lot of wood and laminate edging, various size rolls and widths, natural birch, white oak, maple, red oak, mahogany, veneer edging, (2) sealing irons, roller, (4) misc cutters (GS#1)
718.29.(7) 24” Bar clamps, (1) 36” bar clamp (GS#1)
718.30.(3)24” x ¾”pipe clamps (GS#1)
718.31.(4) Rockler 24” x ¾” pipe clamps (GS#1)
718.32.(4) Rockler 20” x ¾” pipe clamps (GS#1)
718.33.(7) 18” x 1 3/8” wide bar clamps, rust and has concrete residue on them (GS#1)
718.34.(3) Rockler 54” x ¼” pipe clamps (GS#1)
718.35.(3) Rockler 24” x ¾”pipe clamps (GS#1)
718.36.(2) Jorgenson 5ft x 1 5/8”barclamps (GS#1)
718.37.(2) Bessey 32” bar clamps (GS#1)
718.38.(3) Jorgenson 18” bar clamps, (1) 26” bar clamp (GS#1)
718.39.Tru-Grip Back to back bench clamp – 50” grip, 50” bench clamp (GS#1)
718.40.(2) Bessey 25” bar clamps, (1) 12” bar clamp (GS#1)
718.41.(2) Jorgenson 36” x 1 ½” wide bar clamps (GS#1)
718.42.(2) Jorgenson 36” x 1 ½” wide bar clamps (GS#1)
718.43.(2) Jorgenson adjustable wood clamp (GS#1)
718.44.(2) Woodcraft adjustable wood clamps (GS#1)
718.45.Professional wood worker misc ¼” router bits, approximately 67 bits (GS#1)
718.46.(25) Misc router bits ¼” shaft (GS#1)
718.47.(24) Misc ¼” – ½” Router bits (GS#1)
718.48.(12) ½” Router bits (GS#1)
718.49.(3)Sets of various size shaper blades (GS#1)
718.50.(3) Warrior ¼ and 7/8” radius Router bits, new (GS#1)
718.51.Freenborn shaper carbide blade, ¾” bore (GS#1)
718.52.Freenborn shaper carbide blade, ¾” bore (GS#1)
718.53.Freeborn shaper carbide blade, ¾” bore (GS#1)
718.54.Freeborn shaper carbide blade, ¾” bore (GS#1)
718.55.(3) ½” Router bits (GS#1)
718.56.Misc ¼” Router bits and cutter/shapers, approximately 33 bits (GS#1)
718.57.(4) ½” Router bits (GS#1)
718.58.(11) ¼” Dove tail bits, various brands including CMT, Leigh, (GS#1)
718.59.(15) ½” Router Bits (GS#1)
718.60.Misc saw blades (6) 10” with 5/8” arbor, 9” with 5/8” arbor, 6 ½” with 5/8” arbor (GS#1)
718.61.Vermont American tap and die set, various size plug type taps, set of misc ¼” letter taps, set of easy outs (GS#1)
718.62.Blum tandem T-65.100 template for drilling cabinet door holes for hinges, model 65.5000, large lot of various size and styles of hinges, face hinges, shelf supporters, blue motion hinge, self closers and more (GS#1)
718.63.(19) Various size clamps (GS#1)
718.64.(24) Various size clamps (GS#1)
718.65.(4) Braces with wood bits, (1) Hand drill, T-wrench, adjustable circle cutter, wood auger brace bits (GS#1)
718.66.(2)1” c-clamps, (3) 2” c-clamps, (2) 4” c-clamps, (4) 3-ways (GS#1)
718.67.Misc saw blades (4) 10” x 6/8” arbors, (4) 8 ½” with 5/8” arbor, (5) 7” with 5/8” arbor, (1) 6 ½” with 5/8” arbor, (1)51/2” with 10mm arbor (GS#1)
718.68.Misc saw blades (3) 10” with 5/8” arbor, (1) 8 ½” with 5/8” arbor, 8 ¼” with 5/8” arbor, arbr, Makita 6” dad head set, Porter cable 4”carbide blade with 5/8” arbor, Carbide tipped adjustable dad0 (GS#1)
718.69.(8) Sanding belt erasers, used for unclogging your sanding belts 12 3/8” long x 2” x2” (GS#1)
718.70.(4) 14 ¾” blades with 1” arbor (GS#1)
718.71.21” x 7/8” drill bit, 20” x 3/8” drill bit, 16” x 5/8” concrete bit, (5) ¾” concrete bits, (4) extension ladder protectors, (4) Good hand clamps, Leather belt, mini pipe bender, Misc hose clamps, (2) Band clamps (GS#1)
718.72.Hammered copper sink, 32” x 21” x 9” deep (GS#1)
718.73.Senco SN325 framing nailer, jams and seals are bad, with assorted framing nails, comes with Bucket Boss bag (GS#1)
718.74.Betterley Air-glide router base, model AG-7000, comes with original box, new (GS#1)
718.75.Keller Dovetail system, model #1500, like new (GS#1)
718.76.Hitachi miter saw material extensions, stop and clamp (GS#1)
718.77.Hitachi miter saw material extensions, stop and clamp (WRR)
718.78.Hitachi miter saw material extensions, stop and clamp (WRR)
718.79.King Sharpening stone 210mm x 73mm x 22 mm – Made in Japan (WRR)
718.80.King Sharpening stone 210mm x 73mm x 22 mm – Made in Japan (WRR)
718.81.King Sharpening stone 210mm x 73mm x 22 mm – Made in Japan (WRR)
718.82.King Sharpening stone 207mm x 66mm x 34mm – Made in Japan (WRR)
718.83.(6) 30” pipe for pipe clamp, 24” pipes for pipe clamp, sure-foot pipe clamp, (4) Bessey 6 post bench top material holders (WRR)
718.84.Vintage hinges, heavy duty gate hinges, deadbolt hinge, various size and styles (WRR)
718.85.Wall mount Antique candle holder, Antique door latches, Antique door knobs, glass, ceramic, brass and steel (WRR)
718.86.(2)Trojan adjustable material holders (WRR)
718.87.Safco 5 Drawer steel blue print cabinet, 53 ½” x 41 ½” deep x 16 ½” tall, has scuffs and scratches, 3 of the handles will need to be screwed back on, very dusty from being stored (z- R0)